Hiblow HP 200
There is nothing better than these top-quality oxygen pumps. We import them directly.
- Description
- Important information
- User manual
- Technical specifications
- Dimensions
- Installation
- Product video
- FAQs
The slightly higher initial purchase price always pays off in terms of better performance and absolute durability. These compressors are characterised by high performance and low consumption. These low-noise pumps have proven themselves to be reliable long-term performers in large fish farming facilities and fish farms.
Treat yourself to this luxury if safety is important to you. The Hiblow is a diaphragm pump. It operates reliably and quietly, with virtually no maintenance required. In the long term, almost all customers switch to these durable pumps. We also offer them as complete packages at extremely attractive prices. We offer a 3-year
warranty on HiBlow air pumps.
The diaphragms are excluded from the warranty as they are wearing parts.
Wear and tear on the diaphragms is caused by improper handling of the aeration pump.
Please observe the installation instructions for professional accessories for aerating your pond.
Monday to Friday: 9 a.m. to 5 p.m.
- Air pumps must always be protected from the weather.
- It is also important that they are not exposed to excessively high (+40°C) or low (below 5°C) temperatures, as well as humidity (filter shaft/chamber). This leads to rapid wear and tear and even defects
- They should also not be too far away (we recommend max. 2 to 4 metres) from the pond
- Please note that they take in air from the surrounding area and feed it into the pond. In winter, this could mean that you cool down your pond without meaning to.
- If possible, they should also be positioned above the waterline. If this is not the case, please use non-return valves. If water enters the pump, this is not covered by the warranty.
- The label normally indicates the litres of air per minute that the pump discharges. Sufficient and/or suitable air diffusers must also be used in this regard.
- We recommend 9 mm or 16 mm air hose to ensure that the pump works efficiently (from 80 litres/minute, 16 mm air hose can already be used).
| Model | Consumption (W) | Max. output (l/min) |
Pressure (bar) | Noise level (dB) | Dimensions (mm) | Weight (kg) |
| HP-20 | 17 | 20 | 0.10 | 31 | 182 x 138 x 100 | 3.2 |
| HP-40 | 38 | 40 | 0.13 | 32 | 228 x 171 x 190 | 5.7 |
| HP-80 | 71 | 80 | 0.15 | 36 | 235 x 180 x 196 | 7.0 |
| HP-120 | 125 | 120 | 0.18 | 40 | 256 x 200 x 222 | 8.5 |
| HP-200 | 250 | 210 | 0.20 | 50 | 256 x 200 x 222 | 9.0 |
| Model | Dimensions (mm) | Weight (kg) |
| HP-200 | 256 x 200 x 222 | 9.0 |
The series has an integrated diaphragm protection switch. If there is a defect in the diaphragm, the switch automatically trips to protect the pump. You can replace the diaphragm and push the switch back to its original position, then the pump will run perfectly again.
A Hiblow HP 200 generates 200 litres of air per minute. In this case, diffusers should be selected that also allow 200 litres of air per minute to flow out.
Air that does not flow out has a wearing effect on the diaphragms.
Wear occurs, for example
- if the wrong diffusers are selected,
- if the diffusers are not cleaned and become clogged over time,
- air regulation by means of an air tap,
- air hoses that are too small,
- dirty air filters,
- normal wear and tear, etc.
With this air pump, the aerators can be suspended at a water depth of 2 metres.
We recommend the following diffusers:
- 2 x 60 cm aeration rings (16 mm air hose) – approx. 80–92 l/min output per diffuser
- 2 x professional membrane aerators 34 cm(16 mm air hose) – approx. 10–120 l/min output per aerator
Free shipping on orders over €100
KOI Company Quality Promise
Expert advice from a specialist
Up-sells
spare parts
