Small housing suitable for Pond Police Submersible UVC 44 Watt Short
Waterproof housing for the Pond Police Submersible UVC.
For retrofitting the submersible UVC into a housing.
(Connectors not included)
With the Pond Police Submersible UVC housing, you can retrofit your existing Pond Police Submersible UVC into a housing and operate it.
The housing has a threaded connection to which you can screw the submersible UVC directly. On the other side, there is a sight glass through which the UVC lamp can be monitored.
The UVC housing has 3 x 110 mm inlets and outlets that can be operated individually.
It is advisable to anchor a counter screw in the housing in the flexible connections so that the flexible sleeve cannot slip off.
Please refer to the application notes for information on the appropriate connections.
Monday to Friday: 9 a.m. to 5 p.m.
Connectors as shown in the photo are not included in the scope of delivery!
We recommend ordering the appropriate connectors at the same time.
To connect to a 110 mm PVC pipe, you will need:
2 x flexible 110 mm sockets, 1 x flexible 110 mm end cap and 2 x 110 mm pipe clamps
- To connect to a 63 mm PVC pipe, you will need:
2 x flexible 110x63 mm reducing sockets, 1 x flexible 110 mm end cap and 2 x 110 mm pipe clamps
- To connect to a 50 mm PVC pipe, you will need:
2 x flexible reducing sleeves 110x50 mm, 1 x flexible end cap 110 mm and 2 x pipe clamps 110 mm
- To connect to a 50 mm hose, you will need:
2 x flexible reducing sleeves 110 x 50 mm, 1 x flexible end cap 110 mm, 2 x hose nozzles 50 mm and 2 x Hi-Grip hose clamps 50 mm / 2"
- To connect to a 40 mm hose, you will need:
2 x flexible reduction sleeve 110x50mm, 1 x flexible end cap 110 mm, 2 x reduction ring 50 x 40 mm, 2 x hose nozzle 40mm and 2 x Hi-Grip hose clamp 40mm / 2"
When accepting parcels, please ensure that the goods are intact – subsequent complaints will not be accepted!
|
Design |
Dimensions | Connections |
| Small housing suitable for Pond Police Submersible UVC 44 Watt Short | L: 56 cm W: 22.5 cm H: 11.5 cm | 3 x 110 mm |
| Medium housing suitable for Pond Police Submersible UVC 63 & 75 Watt | L: 75 cm W: 22.5 cm H: 11.5 cm | 3 x 110 mm |
| Long housing suitable for Pond Police submersible UVC 90 & 105 watts | L: 100 cm W: 22.5 cm H: 11.5 cm | 3 x 110 mm |
We have had a UVC housing made from the same material as the slotted screens so that you can install an industrial UVC in both gravity and pump variants, regardless of the existing filter system.
The inlet and outlet are 110 mm, and the inlet can be on the right or left, making it usable on both sides. You have the option of customising the inlets and outlets with our flexible sleeves (not included).
You can install this housing both horizontally and vertically. Just make sure that the lamp is always surrounded by water. If the housing is installed vertically, ensure that the housing does not run empty by using non-return valves and the correct piping. The housing can be secured with two 110 mm pipe clamps (not included).
Free shipping on orders over €100
KOI Company Quality Promise
Expert advice from a specialist
Up-sells
set
