AquaForte Vario+ II frequency converter

Artikelnummer: 41299

Available immediately, delivery time: 1-3 days**

Regulate your pond or pool pump and reduce capacity and power consumption.

This allows ohmic or inductive 230 V/AC loads that can be regulated with phase angle control to be continuously regulated in terms of power.

To the product description

€329.00*

Prices include VAT plus shipping costs

Description
Instructions for use
Important information
User manual
Technical specifications
Dimensions
Product video
Information on product safety

Frequency converter for powerful pumps with built-in asynchronous motor.
The frequency converter can convert the frequency of the alternating current to a different frequency, at which the speed of a pump motor can be changed.

The Aqua Forte Vario+ II can be used to control pumps with up to 1100 watts.

The frequency converter has 3 operating modes (speed ranges). The speed range can be set between 1200-1650 rpm, 1700-2400 rpm and 1450-2900. In addition to the speed, the frequency converter also displays the current power consumption of the pump.

You can either operate your pump at a constant speed by selecting "M" or with 4 time-programmable power intervals for daily operation.

Do you have questions about pond supplies and technology?

We are available for you!
Monday to Friday: 9 a.m. to 5 p.m.

+49 (0)6184 93610 info@koi-company.de

Compatible with:

Pumps that can be regulated using phase control

Pumps with asynchronous motors

Not compatible with:

Single-phase motors with centrifugal switches

Pumps with start relays or switches

Series or direct current motors

Pumps with synchronous motors or starting capacitors

Read the operating instructions before commissioning!

This device is intended for use in dry rooms only.

The controller has a memory function in case of a power failure. There is an ultra-capacitor and a clock chip on the circuit board. The ultra-capacitor supplies the clock chip with power, which in turn stores data. If the ultra-capacitor is not supplied with power for more than ten days, the power may be depleted and the E203 code will appear. If this E203 message appears, please disconnect the plug from the mains for a few minutes and then reconnect it. This only needs to be done once, after which everything will function properly again.