Complete Hiblow 80 package
We offer the Hiblow 80 as a complete package with a price advantage.
- Description
- Important information
- User manual
- Technical specifications
- Dimensions
- Installation
- Product video
- FAQs
- Information on product safety
We offer the Hiblow 80 as a complete package with the following components:
- Hiblow 80
- 3-way distributor 9 mm
- 50 m air hose 9 mm
- 2 x Angel Aqua® 4-piece block 22 x 4 cm
This means you are ready to go straight away.
We offer a 3-year warranty on HiBlow air pumps.
Monday to Friday: 9 a.m. to 5 p.m.
- Air pumps must always be protected from the weather.
- It is also important that they are not exposed to excessively high (+40°C) or low (below 5°C) temperatures, as well as humidity (filter shaft/chamber). This leads to rapid wear and tear and even defects
- They should also not be too far away (we recommend max. 2 to 4 metres) from the pond
- Please note that they take in air from the surrounding area and feed it into the pond. In winter, this could mean that you cool down your pond without meaning to.
- If possible, they should also be positioned above the waterline. If this is not the case, please use non-return valves. If water enters the pump, this is not covered by the warranty.
- The label normally indicates the litres of air per minute that the pump discharges. Sufficient and/or suitable air diffusers must also be used in this regard.
- We recommend 9 mm or 16 mm air hose to ensure that the pump works efficiently (from 80 litres/minute, 16 mm air hose can already be used).
| Model | Consumption (W) | Max. output (l/min) |
Pressure (bar) | Noise level (dB) | Dimensions (mm) | Weight (kg) |
| HP-40 | 38 | 40 | 0.13 | 32 | 228 x 171 x 190 | 5.7 |
| HP-80 | 71 | 80 | 0.15 | 36 | 235 x 180 x 196 | 7.0 |
| HP-120 | 125 | 120 | 0.18 | 40 | 256 x 200 x 222 | 8.5 |
| HP-200 | 250 | 210 | 0.20 | 50 | 256 x 200 x 222 | 9.0 |
| Model | Dimensions LxWxH (mm) | Weight (kg) |
| HP-80 | 256 x 180 x 196 | 7.0 |
The series has an integrated diaphragm protection switch. If there is a defect in the diaphragm, the switch is automatically triggered to protect the pump. You can replace the diaphragm and push the switch back to its original position, then the pump will run perfectly again.
A Hiblow HP 80 generates 80 litres of air per minute. In this case, diffusers should be selected that also allow 80 litres of air per minute to flow out.
Air that does not flow out causes wear on the diaphragms.
Wear occurs, for example
- if the wrong diffusers are selected,
- if the diffusers are not cleaned and become clogged over time,
- air regulation by means of an air tap,
- air hoses that are too small,
- dirty air filters,
- normal wear and tear, etc.
With this air pump, the stones can hang at a water depth of 2 metres.
Angaben zur Produktsicherheit:
Verantwortliche Person: Koi Discount GmbH, Jahnstr.10, 63505 Langenselbold
Email: info@koi-company.de
Free shipping on orders over €100
KOI Company Quality Promise
Expert advice from a specialist
Up-sells
spare parts
