ozone reactors
Available immediately, delivery time: 1-3 days**
These ozone reactors are ideal for mixing ozone into your pond water.
Please order a ball valve to go with it. Install this behind the ozone reactor so that you can adjust the water level.
The ideal way to mix ozone into pond water is via an ozone reactor. The ozone is mixed with the water via two communicating tubes. There is a separation screen at the water inlet, which causes the water to swirl vigorously. This allows the ozone to react very well with the water. The ozone reactor should always be operated with a separate pump. If the reactor is exposed to direct sunlight, covering the casing prevents algae formation.
We include 4/6 and 6/8 mm adapter hoses with the reactors so that you can connect them safely.
Monday to Friday: 9 a.m. to 5 p.m.
If you install a ball valve after the ozone reactor, you can regulate the water level in the reactor.
The Ozone Reactor 2 is delivered on a pallet (by freight forwarder).
| Ozone reactor 1 | Ozone reactor 2 | |
| Size Ø without connections (d x h) |
16 x 100 cm | 25 x 100 cm |
| Max. ozone output | 1,000 mg/h | 2,000 mg/h |
| Connections | 2 x 40 mm PVC coupling | 2 x 63 mm PVC coupling |
| Flow rate | 10,000 L/h | 20,000 L/h |
| Ozone hose connection | 8 mm | 8 mm |
Die Röhre färbt sich auf den Innenseite grün
• sollte der Ozonreaktor im Tageslicht stehen, dunkeln Sie diesen
bitte mit z. B. Karton oder einer lichtundurchlässigen Folie zu 2/3 ab.
Der Belag verschwindet dann innerhalb kürzester Zeit durch das
eingebrachte Ozon.
Wie hoch sollte der Wasserstand sein?
• Der Wasserstand sollte immer in Höhe der oberen kurzen Rohre liegen.
• Öffnen Sie den Ozonreaktor und befestigen Sie eine M8 Mutter als Gewicht unterhalb des Schwimmers mit Hilfe eines Kabelbinders oder einer Schraube.
Free shipping on orders over €100
KOI Company Quality Promise
Expert advice from a specialist
Up-sells
