Water level switch WPS 3000PLUS
With the WPS 3000PLUS, you can monitor your level using two water sensors (10 m cable). Simply connect the solenoid valve to the socket using the transformer.
With the WPS 3000PLUS, you can monitor your water level using two water sensors (10 m cable). Simply connect the solenoid valve to the socket using the transformer. As soon as the minimum level is reached, the socket switches on, opens your solenoid valve and your pond is refilled to the previously defined maximum level. Ideal for all drum filters or ponds where a lot of water evaporates in summer. Here too, the relay can be switched on or off.
The new WPS3000plus electronic level differential switch is suitable for automatic level monitoring of conductive liquids in containers, wells, water tanks and similar. The device can be configured as either a refill or drain device using a slide switch on the front. The liquid level is automatically maintained between two water sensors (min. and max.). When water enters or a certain level is reached, a relay is activated and switches mains-powered pumps, valves or warning devices on or off, for example. The WPS 3000plus is suitable for all concrete, plastic or metal storage tanks and is quick to install as all connections are pluggable.
- Switching point freely selectable for any water level via two water sensors
- For all concrete, plastic or metal storage tanks Switching output (relay) configurable as normally closed or normally open (filling/emptying) via switch on the front panel
- Remote measurement up to 20 m possible via two-wire cable
- No dangerous mains voltage at the water sensor
- Operation without servicing or monitoring
- Very simple and quick installation, as it is ready to plug in
- Includes 2 water sensors, each with 10 m cable length and RJ 45 plug
- LED indicators for mains, sensor min, sensor max, error and rel. on
Monday to Friday: 9 a.m. to 5 p.m.
Technical data:
- Operating voltage: 230 V/50 Hz
- Power consumption: max. 1.5 W
- Output voltage: 230 V/50 Hz
- Switching capacity: max. 3000 W
- Operating range: –15°C to +40°C
- Trigger sensitivity: < 50 kOhm
- Sensor input: RJ 45 socket
- Protection class: IP 20
Angaben zur Produktsicherheit:
Hersteller: H-Tronic, Dienhof 11, 92242 Hirschau
Email: info@h-tronic.de
Free shipping on orders over €100
KOI Company Quality Promise
Expert advice from a specialist
Up-sells
![Solenoid valve 3/4"](https://koi-company.com/media/38/8a/c2/1701947668/Magnetventil%2034_40116_1.jpg?ts=1701947668 "Solenoid valve 3/4"")
alternatives
