Water level switch WPS 3000
The WPS 3000 monitors your water level using a water sensor (10 m cable). Upon contact with water, a relay switches on the socket on the control unit. Ideal for technical facilities or basement rooms.
The WPS 3000 monitors your water level using a water sensor (10 m cable). Upon contact with water, a relay switches on the socket on the control unit. Ideal for technical facilities or in basement rooms. You can also check the level of your pond and, if the level drops, switch off your pond pump, for example, so that your pond is not pumped dry. Valves or warning devices can also be controlled. The relay can switch the socket both on and off.
In technical facilities or basement rooms, burst pipes, open windows during heavy rain or defective seals repeatedly cause massive damage as a result of uncontrolled water ingress, to which it is not possible to react quickly enough. It is also necessary to permanently monitor the liquid level in wells or containers. The new WPS 3000 water level switch provides a solution here – when water enters or the predefined level is reached, a relay is activated and automatically switches warning devices, pumps or solenoid valves on or off.
The WPS 3000 is suitable for all concrete, plastic or metal storage tanks and is quick to install as all connections are pluggable. The switching point can be freely selected for any water level. The control unit is supported by a robust sensor. The WPS 3000 operates completely trouble-free as there are no moving float switches. LED lights for "mains", "level" and "rel. on" show the current status at a glance. Two potentiometers can be used to set a pump run-on time of 0...10 minutes to prevent the relay from switching back and forth continuously when the water is moving in waves.
- Switching point freely selectable at any water level
- For all concrete, plastic or metal storage tanks
- Switching output (relay) can be configured as either a normally closed or normally open contact
- Remote measurement up to 25 m via two-wire cable possible
- No dangerous mains voltage at the sensor
- Includes robust water sensor (cable length 10 m) and mounting material for housing (screws, dowels)
Monday to Friday: 9 a.m. to 5 p.m.
Technical data:
- Operating voltage: 230 V/50 Hz
- Power consumption: max. 1.5 W
- Output voltage: 230 V/50 Hz
- Switching capacity: max. 3000 W
- Switch-on/switch-off delay: 0...10 min adjustable
- Trigger sensitivity: < 50 kOhm
- Sensor input: RJ 45 socket
- Protection class: IP 20
Angaben zur Produktsicherheit:
Hersteller: H-Tronic, Dienhof 11, 92242 Hirschau
Email: info@h-tronic.de
Free shipping on orders over €100
KOI Company Quality Promise
Expert advice from a specialist
Up-sells
![Solenoid valve 3/4"](https://koi-company.com/media/38/8a/c2/1701947668/Magnetventil%2034_40116_1.jpg?ts=1701947668 "Solenoid valve 3/4"")
alternatives
